Products

This core pull rosette is specially intended for rim locks. Due to the use of high-quality brushed stainless steel (AISI 316), this rosette has a very long lifespan. This safety rosette has a high-quality brass-colored PVD coating. This special treatment gives the finish an exceptional quality. This makes the product less susceptible to corrosion and the retention of the original finish is guaranteed for a period of 25 years. In addition, this rosette is SKG*** approved, which means that it is an extra heavily burglar-resistant product. You can use this rosette on rim locks with a fixed or loose tail cylinder from Lips and Nemef, among others. And in the case of renovation, installation is extra simple. You can then use the existing hole pattern in the door. Safety rosette with core pulling protection | Fastening material for installation | An extensive installation manual

Read more less

This core pull rosette is specially intended for rim locks. Due to the use of high-quality brushed stainless steel (AISI 316), this rosette has a very long lifespan. In addition, this rosette is SKG*** approved, which means that it is an extra heavily burglar-resistant product. You can use this rosette on rim locks with a fixed or loose tail cylinder from Lips and Nemef, among others. And in the case of renovation, installation is extra simple. You can then use the existing hole pattern in the door. Safety rosette with core pulling protection | Fastening material for installation | An extensive installation manual

Read more less

This core pull rosette is specially intended for rim locks. Due to the use of high-quality brushed stainless steel (AISI 316), this rosette has a very long lifespan. This safety rosette is subsequently provided with a black finish. In addition, this rosette is SKG*** approved, which means that it is an extra heavily burglar-resistant product. You can use this rosette on rim locks with a fixed or loose tail cylinder from Lips and Nemef, among others. And in the case of renovation, installation is extra simple. You can then use the existing hole pattern in the door. Safety rosette with core pulling protection | Fastening material for installation | An extensive installation manual

Read more less

This stainless steel safety sliding rose is specially intended for profile doors. The big advantage of this rosette is that it does not have to be mounted during the assembly of the profile door. By using the blind rivet nuts, you can also retrofit this rosette. This means that with this rosette you can also better secure profile doors in existing buildings. This safety sliding rosette is equipped with core pulling protection, which provides extra safety. In addition, this rosette is SKG** approved, which means that it is a heavily burglar-resistant fitting. Safety sliding rosette | Fastening material for installation | An extensive installation manual

Read more less

Locks offer the option of closing off a space and are available in various designs. Intersteel's burglar-resistant locks are specially designed for exterior doors. This security lock has a profile cylinder hole size of 55 mm and can be used for both left and right opening doors due to the reversible latch. The backset of the lock is 50.5 mm and the stainless steel brushed front plate has dimensions of 174 x 20 mm (hxw). The deadbolt is nickel plated and has two hardened steel pins for extra security. Finally, the security lock is SKG* approved, which means that the product is burglar-resistant as standard. Security lock

Read more less

Locks offer the option of closing off a space and are available in various designs. Intersteel's burglar-resistant locks are specially designed for exterior doors. This security lock has a profile cylinder hole size of 55 mm and can be used for both left and right opening doors due to the reversible latch. The backset of the lock is 51.5 mm and the stainless steel brushed front plate has dimensions of 174 x 25 mm (hxw). The deadbolt is nickel plated and has two hardened steel pins for extra security. Finally, the security lock is SKG** approved, which means that the product is highly burglar-resistant. Security lock

Read more less

Locks offer the option of closing off a space and are available in various designs. Intersteel's burglar-resistant locks are specially designed for exterior doors. This security lock has a profile cylinder hole size of 55 mm and can be used for both left and right opening doors due to the reversible latch. The backset of the lock is 51.5 mm and the stainless steel brushed front plate has dimensions of 174 x 25 mm (hxw). The deadbolt is nickel plated and has two hardened steel pins for extra security. Finally, the security lock is SKG** approved, which means that the product is highly burglar-resistant. Security lock

Read more less

Locks offer the option of closing off a space and are available in various designs. Intersteel's burglar-resistant locks are specially designed for exterior doors. This security lock has a profile cylinder hole size of 72 mm and can be used for both left and right opening doors due to the reversible latch. The deadbolt is nickel plated and has two hardened steel pins for extra security. The backset of the lock is 51.5 mm and the stainless steel brushed front plate has dimensions of 238 x 25 mm (hxw). Finally, the security lock is SKG** approved, which means that the product is highly burglar-resistant. Security lock

Read more less

Locks offer the option of closing off a space and are available in various designs. Intersteel's burglar-resistant locks are specially designed for exterior doors. This security lock has a profile cylinder hole size of 72 mm and can be used for both left and right opening doors due to the reversible latch. The backset of the lock is 51.5 mm and the stainless steel brushed front plate has dimensions of 238 x 25 mm (hxw). The deadbolt is nickel plated and has two hardened steel pins for extra security. Finally, the security lock is SKG** approved, which means that the product is highly burglar-resistant. Security lock

Read more less

To complete your security lock, you will need a striking bowl in addition to a striking plate. This SKG** closing bowl is suitable for inward and outward opening doors and can be used on both the left and right. This locking bowl is adjustable and therefore suitable for the SKG** security locks with a profile cylinder hole size of 55 mm and 72 mm. Closing bowl

Read more less

Helena front door fitting on a rectangular shield is made of zamak and subsequently polished and chrome-plated, giving it a shiny appearance. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a knob on the outside and a matching handle for the inside of the door, has a profile cylinder hole size of 72 mm and can be used on both the left and right. The shield is also provided with lugs, which keep it better in place. In addition, the shield is spring-loaded so that the door handle springs back to its horizontal position after use and is suitable for a handle-operated multi-point lock. This set is supplied including mounting material for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with door knob and core pulling protection|Fixing material for installation|Extensive installation instructions

Read more less

Helena front door fitting on a rectangular shield is made of zamak and subsequently brushed and nickel-plated, giving it a matte appearance. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a knob on the outside and a matching handle for the inside of the door, has a profile cylinder hole size of 72 mm and can be used on both the left and right. The shield is also provided with lugs, which keep it better in place. In addition, the shield is spring-loaded so that the door handle springs back to its horizontal position after use and is suitable for a handle-operated multi-point lock. This set is supplied including mounting material for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with door knob and core pulling protection|Fixing material for installation|Extensive installation instructions

Read more less

Helena front door fitting on a rectangular shield is made of zamak and has a brass-colored PVD coating. This special treatment gives the finish of exceptional quality and makes the product less sensitive to corrosion. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a knob on the outside and a matching handle for the inside of the door, has a profile cylinder hole size of 72 mm and can be used on both the left and right. The shield is also provided with lugs, which keep it better in place. In addition, the shield is spring-loaded so that the door handle springs back to its horizontal position after use and is suitable for a handle-operated multi-point lock. This set is supplied including mounting material for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with door knob and core pulling protection|Fixing material for installation|Extensive installation instructions

Read more less

Helena front door fitting on a rectangular shield is made of zamak and subsequently polished and chrome-plated, giving it a shiny appearance. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a knob on the outside and a matching handle for the inside of the door, has a profile cylinder hole size of 92 mm and can be used on both the left and right. The shield is also provided with lugs, which keep it better in place. In addition, the shield is spring-loaded so that the door handle springs back to its horizontal position after use and is suitable for a handle-operated multi-point lock. This set is supplied including mounting material for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with door knob and core pulling protection|Fixing material for installation|Extensive installation instructions

Read more less

Helena front door fitting on a rectangular shield is made of zamak and subsequently brushed and nickel-plated, giving it a matte appearance. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a knob on the outside and a matching handle for the inside of the door, has a profile cylinder hole size of 92 mm and can be used on both the left and right. The shield is also provided with lugs, which keep it better in place. In addition, the shield is spring-loaded so that the door handle springs back to its horizontal position after use and is suitable for a handle-operated multi-point lock. This set is supplied including mounting material for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with door knob and core pulling protection|Fixing material for installation|Extensive installation instructions

Read more less

Helena front door fitting on a rectangular shield is made of zamak and has a brass-colored PVD coating. This special treatment gives the finish of exceptional quality and makes the product less sensitive to corrosion. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a knob on the outside and a matching handle for the inside of the door, has a profile cylinder hole size of 92 mm and can be used on both the left and right. The shield is also provided with lugs, which keep it better in place. In addition, the shield is spring-loaded so that the door handle springs back to its horizontal position after use and is suitable for a handle-operated multi-point lock. This set is supplied including mounting material for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with door knob and core pulling protection|Fixing material for installation|Extensive installation instructions

Read more less

Helena front door fitting on a rectangular shield is made of zamak and has a trendy black coating. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a knob on the outside and a matching handle for the inside of the door and can be used on both the left and right. The front door fitting has a profile cylinder hole size of 72 mm. This product is supplied per set including mounting materials for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with knob and core pulling protection|Fixing material for mounting

Read more less

Helena front door fitting on a rectangular shield is made of zamak and has a trendy black coating. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a knob on the outside and a matching handle for the inside of the door and can be used on both the left and right. The front door fitting has a profile cylinder hole size of 92 mm. This product is supplied per set including mounting materials for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with knob and core pulling protection|Fixing material for mounting

Read more less

The front door fittings on an oval shield are made of zamak and subsequently polished and chrome-plated, giving it a shiny appearance. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a handle on the outside and a matching handle for the inside of the door and can be used on both the left and right. The front door fitting has a profile cylinder hole size of 72 mm. This product is supplied per set including mounting materials for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with handle and core pulling protection|Fixing material for mounting

Read more less

The front door fittings on an oval shield are made of zamak and subsequently brushed and nickel-plated, giving it a matte appearance. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a handle on the outside and a matching handle for the inside of the door and can be used on both the left and right. The front door fitting has a profile cylinder hole size of 72 mm. This product is supplied per set including mounting materials for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with handle and core pulling protection|Fixing material for mounting

Read more less

The front door fittings on an oval shield are made of zamak and subsequently polished and chrome-plated, giving it a shiny appearance. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a handle on the outside and a matching handle for the inside of the door and can be used on both the left and right. The front door fitting has a profile cylinder hole size of 92 mm. This product is supplied per set including mounting materials for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with handle and core pulling protection|Fixing material for mounting

Read more less

The front door fittings on an oval shield are made of zamak and subsequently brushed and nickel-plated, giving it a matte appearance. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a handle on the outside and a matching handle for the inside of the door and can be used on both the left and right. The front door fitting has a profile cylinder hole size of 92 mm. This product is supplied per set including mounting materials for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with handle and core pulling protection|Fixing material for mounting

Read more less

This round front door knob is made of stainless steel. The use of stainless steel gives this front door knob a long lifespan and the brushed treatment gives this knob a matte appearance. The button has a diameter of 75 mm. Installation is easy with the supplied mounting material for single-sided mounting. Front door knob incl. back plate | Fastening material for mounting

Read more less

This convex front door knob is made of stainless steel and has been tumbled. In addition, the front door knob is finished with a brass-colored PVD coating. The product is supplied including all necessary mounting materials. Front door knob incl. back plate | Mounting material

Read more less