Products

To complete your security lock, you will need a striking plate in addition to a locking bowl. This rounded stainless steel strike plate has dimensions of 192 x 25 x 1.5 mm and is equipped with a short lip. This DIN left strike plate fits the SKG** security locks with a profile cylinder hole size of 55 mm, both the variant with a rectangular front plate (0094.955229) and the variant with a rounded front plate (0094.955129). Strike plate

Read more less

To complete your security lock, you will need a striking plate in addition to a locking bowl. This rounded stainless steel strike plate has dimensions of 192 x 25 x 1.5 mm and is equipped with a short lip. This DIN right strike plate fits the SKG** security locks with a profile cylinder hole size of 55 mm, both the variant with a rectangular front plate (0094.955229) and the variant with a rounded front plate (0094.955129). Tip!DIN left or right? Before you choose a striker, it is important to know the direction of opening of your door. You can easily determine this by imagining the following situation. If you stand in front of your door, then pull your door towards you and the hinges are on the right side, you need a DIN right front plate. If the hinges are on the left side, you need a DIN left front plate. Another situation is when the door opens outwards. You are standing in front of your door, you push the door away from you and the hinges are on the right. Then you need a DIN left strike plate. If the hinges are on the left, you need a DIN right-hand strike plate. Strike plate

Read more less

To complete your security lock, you will need a striking plate in addition to a locking bowl. This rounded stainless steel strike plate has dimensions of 192 x 25 x 1.5 mm and is equipped with a short lip. This DIN left strike plate fits the SKG** security locks with a profile cylinder hole size of 72 mm, both the variant with a rectangular front plate (0094.955436) and the variant with a rounded front plate (0094.955336). Tip!DIN left or right? Before you choose a striker, it is important to know the direction of opening of your door. You can easily determine this by imagining the following situation. If you stand in front of your door, then pull your door towards you and the hinges are on the right side, you need a DIN right front plate. If the hinges are on the left side, you need a DIN left front plate. Another situation is when the door opens outwards. You are standing in front of your door, you push the door away from you and the hinges are on the right. Then you need a DIN left strike plate. If the hinges are on the left, you need a DIN right-hand strike plate. Strike plate

Read more less

To complete your security lock, you will need a striking plate in addition to a locking bowl. This rounded stainless steel strike plate has dimensions of 192 x 25 x 1.5 mm and is equipped with a short lip. This DIN right strike plate fits the SKG** security locks with a profile cylinder hole size of 72 mm, both the variant with a rectangular front plate (0094.955436) and the variant with a rounded front plate (0094.955336). Tip!DIN left or right? Before you choose a striker, it is important to know the direction of opening of your door. You can easily determine this by imagining the following situation. If you stand in front of your door, then pull your door towards you and the hinges are on the right side, you need a DIN right front plate. If the hinges are on the left side, you need a DIN left front plate. Another situation is when the door opens outwards. You are standing in front of your door, you push the door away from you and the hinges are on the right. Then you need a DIN left strike plate. If the hinges are on the left, you need a DIN right-hand strike plate. Strike plate

Read more less

An adjusting pin is intended for window stays and gives you the opportunity to easily ventilate your home. The window stay is intended for outward opening windows and you can easily determine the ventilation position with the adjustment pin. The adjustment pin is made of nickel and is subsequently brushed, giving it a matte appearance. Leveling pin|Fastening material for mounting

Read more less

This DIN left hinge is made of stainless steel and is subsequently brushed, giving it a matte appearance. Due to the use of solid stainless steel, this product has a long lifespan. This hinge is 89 mm high, 89 mm wide when unfolded and has 2.5 mm thick edges. This hinge is suitable for doors weighing up to 90 kilos. DIN left or right? Before you choose a hinge, it is important to know the direction of opening of your door. You can easily determine this by imagining the following situation. If you are standing in front of your door, then pull your door towards you and the hinges are on the right side, then you need DIN right hinges. If the hinges are on the left side, you need a DIN left hinge. Another situation is when the door opens outwards. You are standing in front of your door, you push the door away from you and the hinges are on the right. Then a DIN needs a left hinge. If the hinges are on the left, you need a DIN right hinge. Paumelle

Read more less

This DIN right hinge is made of stainless steel and is subsequently brushed, giving it a matte appearance. Due to the use of solid stainless steel, this product has a long lifespan. This hinge is 89 mm high, 89 mm wide when unfolded and has 2.5 mm thick edges. This hinge is suitable for doors weighing up to 90 kilos. DIN left or right? Before you choose a hinge, it is important to know the direction of opening of your door. You can easily determine this by imagining the following situation. If you are standing in front of your door, then pull your door towards you and the hinges are on the right side, then you need DIN right hinges. If the hinges are on the left side, you need a DIN left hinge. Another situation is when the door opens outwards. You are standing in front of your door, you push the door away from you and the hinges are on the right. Then a DIN needs a left hinge. If the hinges are on the left, you need a DIN right hinge. Paumelle

Read more less

A pivot door hinge or pivot hinge offers the possibility to rotate a pivot door around its vertical axis. The pivot points are located at the top and bottom of the door. Not only does it offer a practical and space-saving solution, it also gives your interior a stylish and sleek look. This pivot door hinge is made of aluminum and equipped with a brushed stainless steel housing and cover caps. This hinge is suitable for wooden doors weighing up to 75 kilos and from door thickness 40 mm. The standard opening angle of the door from the closed position is 150° and the pivot hinge has a position lock of 90°. The closing speed of the door is adjustable, so you can determine how quickly the door closes.  Mounting takes place in the ceiling and on the floor and the hinge is supplied individually including mounting material. Pivot hinge|Fastening material

Read more less

A pivot door hinge or pivot hinge offers the possibility to rotate a pivot door around its vertical axis. The pivot points are located at the top and bottom of the door. Not only does it offer a practical and space-saving solution, it also gives your interior a stylish and sleek look. This pivot door hinge is made of aluminum and has a black housing and cover caps. This hinge is suitable for wooden doors weighing up to 75 kilos and from door thickness 40 mm. The standard opening angle of the door from the closed position is 150° and the pivot hinge has a position lock of 90°. The closing speed of the door is adjustable, so you can determine how quickly the door closes.  Mounting takes place in the ceiling and on the floor and the hinge is supplied individually including mounting material. Pivot hinge | Fastening material for mounting

Read more less

With this window stay you can open an outward opening window for ventilation at any desired opening angle. This tele-expansion is infinitely adjustable and you only need to set it once. The retracted length is 250 mm and it is suitable for windows up to 60 cm wide. The tele-expander is made of steel and has a gray coating. Also suitable for mounting on windows with hinges at the top; in that case, place two window stays on both sides. In that case, the window width may be a maximum of 120 cm and the window height 60 cm. The big advantage of a tele-mount is that it does not protrude inwards when a window is opened, so it can be combined with a mosquito net. This window stay is supplied per piece including mounting material for mounting. Window stay | Fastening material for mounting

Read more less

With this window stay you can open an outward opening window for ventilation at any desired opening angle. This tele-expansion is infinitely adjustable and you only need to set it once. The retracted length is 305 mm and it is suitable for windows up to a width of 80 cm. The tele-expander is made of steel and has a gray coating. Also suitable for mounting on windows with hinges at the top; in that case, place two window stays on both sides. In that case, the window width may be a maximum of 120 cm and the window height 80 cm. The big advantage of a tele-mount is that it does not protrude inwards when a window is opened, so it can be combined with a mosquito net. This window stay is supplied per piece including mounting material for mounting. Window stay | Fastening material for mounting

Read more less

Preventing drafts is easy with this oval stainless steel draft barrier for the inside of a door. This product is made of stainless steel and then brushed, which gives the product a matte appearance. Due to the use of solid stainless steel, this product has a long lifespan. Draft excluder|Fixing material for mounting

Read more less

Preventing drafts is easy with this stainless steel oval draft excluder in a matte black version. Installation on the inside of a door is easy with the supplied mounting material. Draft excluder|Fixing material for mounting

Read more less

Preventing drafts is easy with this rectangular stainless steel draft barrier with flap for the inside of a door. This product is made of stainless steel and then brushed, which gives the product a matte appearance. Due to the use of solid stainless steel, this product has a long lifespan. Draft excluder|Fixing material for mounting

Read more less

Preventing drafts is easy with this rectangular stainless steel draft barrier for the inside of a door. This product is made of stainless steel and then brushed, which gives the product a matte appearance. Due to the use of solid stainless steel, this product has a long lifespan. Draft excluder|Fixing material for mounting

Read more less

Preventing drafts is easy with this stainless steel rectangular draft damper in a matte black version. Installation on the inside of a door is easy with the supplied mounting material. Draft excluder|Fixing material for mounting

Read more less

A traditional doorbell is the pull bell from the 1930s. This pull bell is made in matte black and consists of six parts; spring holder, bell spring, bell, two rocker arms and a pull rod with knob and rosette. In addition to the fact that a pull bell gives your front door a classic appearance, the big advantage is that it does not require electricity. Spring holder|Bell spring|Bell|Two rocker arms|Pull position with knob and rosette|Extensive installation instructions

Read more less

Bring back the nostalgic charm of the 1930s to your home with this authentic pull bell. This traditional doorbell combines a classic design with high-quality materials, making it not only a stylish addition to your front door, but also fully functional without consuming electricity. Ideal for lovers of timeless design and sustainability. High-quality brass with glossy finish The bell is made of solid brass and is subsequently polished and provided with a layer of lacquer. This ensures a beautiful shiny appearance and offers extra protection against wear and weather, so that the bell retains its elegant look for years to come. Traditional design with six essential parts This pull bell consists of six carefully crafted parts that together ensure smooth and reliable operation: Spring holder – holds the bell spring in place and provides stability. Belveer – provides a clear and recognizable sound. Bell – produces a clear sound when activated. Two rocker arms – connect the pull rod to the bell and ensure a smooth movement. Pull rod with knob and rosette – an elegant control that fits effortlessly with classic front doors. Energy-efficient and maintenance-friendly Unlike modern electric doorbells, this pull bell does not require a power supply. This not only makes it durable and environmentally friendly, but also easy to use without dependence on batteries or wiring. Easy installation with extensive instructions This pull bell comes with detailed installation instructions, so you can easily install it yourself. All necessary parts are included, so that your front door will be equipped with a beautiful classic bell in a short time. Why choose this brass bell? Authentic 1930s design – a timeless addition to your home. High-quality brass – glossy finish and durable. Energy efficient – no electricity or batteries required. Completely mechanical system – reliable and low-maintenance. All mounting parts included – easy to install yourself. Give your entrance a classic and stylish look with this brass pull bell. Order today and enjoy the authentic charm and clear sound of this traditional doorbell!

Read more less

Oval safety sliding rosette for profile cylinder in stainless steel design. This product is produced from solid stainless steel and is then brushed, giving the product its matte appearance. The profile cylinder is protected by a core pull protection, which increases burglary safety. Assembly is carried out by sliding the rosette over the mounting plate. Safety sliding rosette | Fastening material for installation | An extensive installation manual

Read more less

Oval safety sliding rosette for profile cylinder in stainless steel design. This product is produced from solid stainless steel and is then brushed, giving the product its matte appearance. The profile cylinder is protected by a round hardened steel plate with a slot, which increases burglary protection. Assembly is carried out by sliding the rosette over the mounting plate. Safety sliding rosette | Fastening material for installation | An extensive installation manual

Read more less

Oval safety sliding rosette for profile cylinder in stainless steel design. This product is produced from solid stainless steel and is then brushed, giving the product its matte appearance. Assembly is carried out by sliding the rosette over the mounting plate. Safety sliding rosette | Fastening material for installation | An extensive installation manual

Read more less

Rectangular safety sliding rosette for profile cylinder in stainless steel design. This product is produced from solid stainless steel and is then brushed, giving the product its matte appearance. Assembly is carried out by sliding the rosette over the mounting plate. Safety sliding rosette | Fastening material for installation | An extensive installation manual

Read more less

This oval set of back door fittings is equipped with extra protection against burglary and is SKG*** approved. This set has a profile cylinder hole size of 72 mm and has a matching door handle on both sides. The security fittings are made of chrome and polished afterwards, giving it a shiny appearance. The security fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. Core pull protection has been mandatory in new construction since the end of 2013 and also for existing construction since April 2014. Inner shield with door handle and profile cylinder hole|Outer shield with door handle and core pull protection|Fixing material for installation|Extensive installation instructions

Read more less

This oval set of back door fittings is equipped with extra protection against burglary and is SKG*** approved. This set has a profile cylinder hole size of 72 mm and has a matching door handle on both sides. The security fittings are made of brass and subsequently polished and coated with a layer of lacquer, giving it a shiny appearance. The security fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. Core pull protection has been mandatory in new construction since the end of 2013 and also for existing construction since April 2014. Inner shield with door handle and profile cylinder hole|Outer shield with door handle and core pull protection|Fixing material for installation|Extensive installation instructions

Read more less